Product Code: GRG
Ultimate protection for hard-driven, high-performance
vehicles. Dramatically reduces friction and wear for improved performance.
Excels at both high and low temperature performance. Outperforms
other conventional and synthetic greases.
"Before using
AMSOIL, two of our race cars were suffering wheel
bearing seizure on a regular basis. This year, using
AMSOIL Racing Grease, our problems stopped totally."
H.C., Houston, TX |
Applications
AMSOIL Series 2000 Synthetic Lithium Complex Racing Grease meets
the highest performance standards of the National Lubricating Grease
Institute, GC for wheel bearing applications and LB for chassis applications. |
Load Capacity
AMSOIL Series 2000 Racing Grease is an extreme-pressure multi-purpose grease
formulated for high-temperature/high-speed applications. Yet, it excels in
the protection of low-speed bearings, a job usually reserved for heavy-duty
products. Components get the load bearing capacity of a heavy-duty grease without
sacrificing the high-temperature protection of a multi-purpose.
 Anti-Wear
Performance
AMSOIL Series 2000 Racing Grease passes the Ford Film Strength Endurance Test
with a 16 point margin (see graph). Most nonsolid-fortified racing greases,
synthetic or conventional, do not pass. AMSOIL Series 2000 Racing Grease keeps
greased components in like-new condition.
All-Temperature Protection
AMSOIL Series 2000 Racing Grease pairs a high Viscosity Index synthetic base
oil with a top-quality lithium complex thickener, known for its extraordinary
performance in temperature extremes. AMSOIL Series 2000 Racing Grease offers
excellent low-temperature pumpability and high-temperature consistency for
dependable all-temperature protection.
Oxidation Resistance and Inhibition
AMSOIL Series 2000 Racing Grease’s excellent oxidation resistance and
robust package of oxidation inhibitors prevent grease breakdown and component
surface damage in the highly oxidizing conditions associated with high temperature
operations.
Friction Reduction
AMSOIL Series 2000 Racing Grease maximizes power through-put and fuel efficiency
by minimizing friction. The extra power given by Series 2000 improves acceleration
and top-end speed.
Washout Resistance and Corrosion Inhibition
AMSOIL Series 2000 Racing Grease resists water wash out and inhibits rust
and other forms of corrosion.
| Typical
Technical Properties |
| AMSOIL Synthetic Lithium
Complex Racing Grease |
NLGI
GC-LB |
Series 2000 Racing Grease |
| Thickener |
NR* |
Lithium Complex |
| NLGI Consistency Grade |
NR* |
2 EP |
| NLGI Performance Grade |
NR* |
GC-LB |
| Penetration (ASTM D-217) 25° C
[77° F], 0.1 mm Worked 60 strokes |
220 - 340 |
265 - 295 |
| Dropping Point (ASTM D-566) °C
[77° F] |
220 [428] |
285 [545] |
| Water Washout (ASTM D-1264) 79° C [175° F]
% loss |
15 max |
5.1 |
| Oil Separation (ASTM D-1742) 24 hr. @ 25° C
[77° F], % loss |
10 max |
2.8 |
| Rust Protection (ASTM D-1743) |
pass |
pass |
| Timken OK Load Test (ASTM D-2509), lbs. |
NR* |
60 |
| Fortified with Moly Compound |
NR* |
no |
| Four Ball Wear Test (ASTM D-2266) Wear Scar
Diameter, mm |
0.9 max |
0.32 |
| Compatibility with other greases |
NR* |
excellent |
| Extreme Pressure, Four Ball Method (ASTM D-2596)
Weld Point, kgf |
200 min |
400 |
| Extreme Pressure, Four Ball Method (ASTM D-2596)
Load Wear Index, kgf |
30 min |
65 |
| High Temperature Life (ASTM D-3527) hours |
80 min |
300 |
| Fretting Wear (ASTM D-4170)* mg |
10 max |
3.4 |
| Elastomer Compatibility (ASTM D-4289) Volume
Change, %, GC |
-5 to +30 |
21.6 |
| Elastomer Compatibility (ASTM D-4289) Volume
Change, %, LB |
0 to +30 |
9.88 |
| Elastomer Compatibility (ASTM D-4289) Hardness
Change, durometer-A points, GC |
+2 to -15 |
-3 |
| Elastomer Compatibility (ASTM D-4289) Hardness
Change, durometer-A points, LB |
0 to -10 |
-6 |
| Leakage (ASTM D-4290), G* |
10 max |
6.0 |
| Low Temperature Torque (ASTM D-4693) n·m,
max @ -40° C [-40° F] |
15.5 |
2.3 |
| Water Spray Off (ASTM D-4049), % max |
NR* |
22.7 |
| * NR: Not Required for NLGI GC
or LB labeling |
|
