AMSOIL and Break In on New and Rebuilt Engines

Q. I heard that new cars require a break in period with petroleum before you switch them to synthetic. How long should this break in period be?

A. AMSOIL Synthetic Motor Oil can be used during break-in trouble free. In fact, vehicles such as Dodge Viper and Chevrolet Corvette come factory filled with synthetic oil.

Since most new vehicles come filled with petroleum oil, it only makes good sense to change to AMSOIL at the first scheduled oil change interval. New engine components generate high levels of wear metals and can contain contaminants from assembly. By allowing the engine to operate with the petroleum oil until the first oil/filter change interval, the wear metals and contaminants are removed prior to installing AMSOIL.

Converting From Petroleum Motor Oil To Synthetic Motor Oil

Q. I am considering replacing the petroleum oil with AMSOIL synthetic oil in an engine that has 50,000 miles on it. I have heard that synthetics might clean the engine and cause plugging of the oil filter and passageways. Is this true?

A. Absolutely not. Switching from petroleum oil to AMSOIL in routinely maintained vehicles will not cause clogged oil filters or passageways, regardless of mileage. Sludge, which is caused by poor quality oil and neglected maintenance practices, would have to be present in significant amounts to plug oil filters and passageways. If this excessive amount of sludge is present in an engine, it is just a matter of time before oil filters and passageways clog, regardless of the installation of AMSOIL.

Converting From Petroleum Motor Oil To Synthetic Motor Oil

Q. Is it true that installing AMSOIL or other synthetic oils will cause my engine to leak oil?

A. In modern vehicles, there is no risk of AMSOIL motor oil leaking. In fact, AMSOIL motor oil is fully compatible with modern seal materials. It is properly formulated to condition seals, keeping them pliable to prevent leakage.